Last updated: July 22, 2025
Not null count match data quality checks, SQL examples
A column-level check that ensures that compares the count of not null values in the tested column to the count of not null values in a reference column from the reference table. Compares the count of not null values for each group of data. The data is grouped using a GROUP BY clause and groups are matched between the tested (parent) table and the reference table (the source of truth).
The not null count match data quality check has the following variants for each type of data quality checks supported by DQOps.
profile not null count match
Check description
Verifies that percentage of the difference between the count of not null values in a tested column in a parent table and the count of not null values in a column in the reference table. The difference must be below defined percentage thresholds.
Data quality check name | Friendly name | Category | Check type | Time scale | Quality dimension | Sensor definition | Quality rule | Standard |
---|---|---|---|---|---|---|---|---|
profile_not_null_count_match |
Maximum percentage of difference between the counts of not null values in compared columns | comparisons | profiling | Accuracy | not_null_count | diff_percent |
Command-line examples
Please expand the section below to see the DQOps command-line examples to run or activate the profile not null count match data quality check.
Managing profile not null count match check from DQOps shell
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the warning rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=profile_not_null_count_match --enable-warning
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=profile_not_null_count_match --enable-warning
Additional rule parameters are passed using the -Wrule_parameter_name=value.
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the error rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=profile_not_null_count_match --enable-error
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=profile_not_null_count_match --enable-error
Additional rule parameters are passed using the -Erule_parameter_name=value.
Run this data quality check using the check run CLI command by providing the check name and all other targeting filters. The following example shows how to run the profile_not_null_count_match check on all tables and columns on a single data source.
It is also possible to run this check on a specific connection and table. In order to do this, use the connection name and the full table name parameters.
You can also run this check on all tables (and columns) on which the profile_not_null_count_match check is enabled using patterns to find tables.
YAML configuration
The sample schema_name.table_name.dqotable.yaml file with the check configured is shown below.
# yaml-language-server: $schema=https://cloud.dqops.com/dqo-yaml-schema/TableYaml-schema.json
apiVersion: dqo/v1
kind: table
spec:
table_comparisons:
compare_to_source_of_truth_table:
reference_table_connection_name: <source_of_truth_connection_name>
reference_table_schema_name: <source_of_truth_schema_name>
reference_table_name: <source_of_truth_table_name>
check_type: profiling
grouping_columns:
- compared_table_column_name: country
reference_table_column_name: country_column_name_on_reference_table
- compared_table_column_name: state
reference_table_column_name: state_column_name_on_reference_table
columns:
target_column:
profiling_checks:
comparisons:
compare_to_source_of_truth_table:
reference_column: source_of_truth_column_name
profile_not_null_count_match:
warning:
max_diff_percent: 0.0
error:
max_diff_percent: 1.0
fatal:
max_diff_percent: 5.0
labels:
- This is the column that is analyzed for data quality issues
country:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
state:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
Samples of generated SQL queries for each data source type
Please expand the database engine name section to see the SQL query rendered by a Jinja2 template for the not_null_count data quality sensor.
BigQuery
{% import '/dialects/bigquery.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
ClickHouse
{% import '/dialects/clickhouse.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Databricks
{% import '/dialects/databricks.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DB2
{% import '/dialects/db2.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DuckDB
{% import '/dialects/duckdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
HANA
{% import '/dialects/hana.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MariaDB
{% import '/dialects/mariadb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MySQL
{% import '/dialects/mysql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Oracle
{% import '/dialects/oracle.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
{{- lib.render_where_clause(table_alias_prefix='original_table') }}
) analyzed_table
WHERE ({{ lib.render_target_column('analyzed_table')}}) IS NOT NULL
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
PostgreSQL
{% import '/dialects/postgresql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Presto
{% import '/dialects/presto.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
QuestDB
{% import '/dialects/questdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM(
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Redshift
{% import '/dialects/redshift.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Snowflake
{% import '/dialects/snowflake.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Spark
{% import '/dialects/spark.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SQL Server
{% import '/dialects/sqlserver.sql.jinja2' as lib with context -%}
SELECT
COUNT_BIG({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Teradata
{% import '/dialects/teradata.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Trino
{% import '/dialects/trino.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
daily not null count match
Check description
Verifies that percentage of the difference between the count of not null values in a tested column in a parent table and the count of not null values in a column in the reference table. The difference must be below defined percentage thresholds. Stores the most recent captured value for each day when the data quality check was evaluated.
Data quality check name | Friendly name | Category | Check type | Time scale | Quality dimension | Sensor definition | Quality rule | Standard |
---|---|---|---|---|---|---|---|---|
daily_not_null_count_match |
Maximum percentage of difference between the counts of not null values in compared columns | comparisons | monitoring | daily | Accuracy | not_null_count | diff_percent |
Command-line examples
Please expand the section below to see the DQOps command-line examples to run or activate the daily not null count match data quality check.
Managing daily not null count match check from DQOps shell
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the warning rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=daily_not_null_count_match --enable-warning
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=daily_not_null_count_match --enable-warning
Additional rule parameters are passed using the -Wrule_parameter_name=value.
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the error rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=daily_not_null_count_match --enable-error
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=daily_not_null_count_match --enable-error
Additional rule parameters are passed using the -Erule_parameter_name=value.
Run this data quality check using the check run CLI command by providing the check name and all other targeting filters. The following example shows how to run the daily_not_null_count_match check on all tables and columns on a single data source.
It is also possible to run this check on a specific connection and table. In order to do this, use the connection name and the full table name parameters.
You can also run this check on all tables (and columns) on which the daily_not_null_count_match check is enabled using patterns to find tables.
YAML configuration
The sample schema_name.table_name.dqotable.yaml file with the check configured is shown below.
# yaml-language-server: $schema=https://cloud.dqops.com/dqo-yaml-schema/TableYaml-schema.json
apiVersion: dqo/v1
kind: table
spec:
table_comparisons:
compare_to_source_of_truth_table:
reference_table_connection_name: <source_of_truth_connection_name>
reference_table_schema_name: <source_of_truth_schema_name>
reference_table_name: <source_of_truth_table_name>
check_type: profiling
grouping_columns:
- compared_table_column_name: country
reference_table_column_name: country_column_name_on_reference_table
- compared_table_column_name: state
reference_table_column_name: state_column_name_on_reference_table
columns:
target_column:
monitoring_checks:
daily:
comparisons:
compare_to_source_of_truth_table:
reference_column: source_of_truth_column_name
daily_not_null_count_match:
warning:
max_diff_percent: 0.0
error:
max_diff_percent: 1.0
fatal:
max_diff_percent: 5.0
labels:
- This is the column that is analyzed for data quality issues
country:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
state:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
Samples of generated SQL queries for each data source type
Please expand the database engine name section to see the SQL query rendered by a Jinja2 template for the not_null_count data quality sensor.
BigQuery
{% import '/dialects/bigquery.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
ClickHouse
{% import '/dialects/clickhouse.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Databricks
{% import '/dialects/databricks.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DB2
{% import '/dialects/db2.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DuckDB
{% import '/dialects/duckdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
HANA
{% import '/dialects/hana.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MariaDB
{% import '/dialects/mariadb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MySQL
{% import '/dialects/mysql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Oracle
{% import '/dialects/oracle.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
{{- lib.render_where_clause(table_alias_prefix='original_table') }}
) analyzed_table
WHERE ({{ lib.render_target_column('analyzed_table')}}) IS NOT NULL
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
PostgreSQL
{% import '/dialects/postgresql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Presto
{% import '/dialects/presto.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
QuestDB
{% import '/dialects/questdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM(
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Redshift
{% import '/dialects/redshift.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Snowflake
{% import '/dialects/snowflake.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Spark
{% import '/dialects/spark.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SQL Server
{% import '/dialects/sqlserver.sql.jinja2' as lib with context -%}
SELECT
COUNT_BIG({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Teradata
{% import '/dialects/teradata.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Trino
{% import '/dialects/trino.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
monthly not null count match
Check description
Verifies that percentage of the difference between the count of not null values in a tested column in a parent table and the count of not null values in a column in the reference table. The difference must be below defined percentage thresholds. Stores the most recent captured value for each month when the data quality check was evaluated.
Data quality check name | Friendly name | Category | Check type | Time scale | Quality dimension | Sensor definition | Quality rule | Standard |
---|---|---|---|---|---|---|---|---|
monthly_not_null_count_match |
Maximum percentage of difference between the counts of not null values in compared columns | comparisons | monitoring | monthly | Accuracy | not_null_count | diff_percent |
Command-line examples
Please expand the section below to see the DQOps command-line examples to run or activate the monthly not null count match data quality check.
Managing monthly not null count match check from DQOps shell
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the warning rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=monthly_not_null_count_match --enable-warning
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=monthly_not_null_count_match --enable-warning
Additional rule parameters are passed using the -Wrule_parameter_name=value.
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the error rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=monthly_not_null_count_match --enable-error
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=monthly_not_null_count_match --enable-error
Additional rule parameters are passed using the -Erule_parameter_name=value.
Run this data quality check using the check run CLI command by providing the check name and all other targeting filters. The following example shows how to run the monthly_not_null_count_match check on all tables and columns on a single data source.
It is also possible to run this check on a specific connection and table. In order to do this, use the connection name and the full table name parameters.
You can also run this check on all tables (and columns) on which the monthly_not_null_count_match check is enabled using patterns to find tables.
YAML configuration
The sample schema_name.table_name.dqotable.yaml file with the check configured is shown below.
# yaml-language-server: $schema=https://cloud.dqops.com/dqo-yaml-schema/TableYaml-schema.json
apiVersion: dqo/v1
kind: table
spec:
table_comparisons:
compare_to_source_of_truth_table:
reference_table_connection_name: <source_of_truth_connection_name>
reference_table_schema_name: <source_of_truth_schema_name>
reference_table_name: <source_of_truth_table_name>
check_type: profiling
grouping_columns:
- compared_table_column_name: country
reference_table_column_name: country_column_name_on_reference_table
- compared_table_column_name: state
reference_table_column_name: state_column_name_on_reference_table
columns:
target_column:
monitoring_checks:
monthly:
comparisons:
compare_to_source_of_truth_table:
reference_column: source_of_truth_column_name
monthly_not_null_count_match:
warning:
max_diff_percent: 0.0
error:
max_diff_percent: 1.0
fatal:
max_diff_percent: 5.0
labels:
- This is the column that is analyzed for data quality issues
country:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
state:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
Samples of generated SQL queries for each data source type
Please expand the database engine name section to see the SQL query rendered by a Jinja2 template for the not_null_count data quality sensor.
BigQuery
{% import '/dialects/bigquery.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
ClickHouse
{% import '/dialects/clickhouse.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Databricks
{% import '/dialects/databricks.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DB2
{% import '/dialects/db2.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
DuckDB
{% import '/dialects/duckdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
HANA
{% import '/dialects/hana.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MariaDB
{% import '/dialects/mariadb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
MySQL
{% import '/dialects/mysql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Oracle
{% import '/dialects/oracle.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
{{- lib.render_where_clause(table_alias_prefix='original_table') }}
) analyzed_table
WHERE ({{ lib.render_target_column('analyzed_table')}}) IS NOT NULL
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
PostgreSQL
{% import '/dialects/postgresql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Presto
{% import '/dialects/presto.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
QuestDB
{% import '/dialects/questdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM(
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Redshift
{% import '/dialects/redshift.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Snowflake
{% import '/dialects/snowflake.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Spark
{% import '/dialects/spark.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SQL Server
{% import '/dialects/sqlserver.sql.jinja2' as lib with context -%}
SELECT
COUNT_BIG({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Teradata
{% import '/dialects/teradata.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
Trino
{% import '/dialects/trino.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
daily partition not null count match
Check description
Verifies that percentage of the difference between the count of not null values in a tested column in a parent table and the count of not null values in a column in the reference table. The difference must be below defined percentage thresholds. Compares each daily partition (each day of data) between the compared table and the reference table (the source of truth).
Data quality check name | Friendly name | Category | Check type | Time scale | Quality dimension | Sensor definition | Quality rule | Standard |
---|---|---|---|---|---|---|---|---|
daily_partition_not_null_count_match |
Maximum percentage of difference between the counts of not null values in compared columns | comparisons | partitioned | daily | Accuracy | not_null_count | diff_percent |
Command-line examples
Please expand the section below to see the DQOps command-line examples to run or activate the daily partition not null count match data quality check.
Managing daily partition not null count match check from DQOps shell
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the warning rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=daily_partition_not_null_count_match --enable-warning
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=daily_partition_not_null_count_match --enable-warning
Additional rule parameters are passed using the -Wrule_parameter_name=value.
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the error rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=daily_partition_not_null_count_match --enable-error
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=daily_partition_not_null_count_match --enable-error
Additional rule parameters are passed using the -Erule_parameter_name=value.
Run this data quality check using the check run CLI command by providing the check name and all other targeting filters. The following example shows how to run the daily_partition_not_null_count_match check on all tables and columns on a single data source.
It is also possible to run this check on a specific connection and table. In order to do this, use the connection name and the full table name parameters.
dqo> check run -c=connection_name -t=schema_name.table_name -ch=daily_partition_not_null_count_match
You can also run this check on all tables (and columns) on which the daily_partition_not_null_count_match check is enabled using patterns to find tables.
YAML configuration
The sample schema_name.table_name.dqotable.yaml file with the check configured is shown below.
# yaml-language-server: $schema=https://cloud.dqops.com/dqo-yaml-schema/TableYaml-schema.json
apiVersion: dqo/v1
kind: table
spec:
timestamp_columns:
partition_by_column: date_column
incremental_time_window:
daily_partitioning_recent_days: 7
monthly_partitioning_recent_months: 1
table_comparisons:
compare_to_source_of_truth_table:
reference_table_connection_name: <source_of_truth_connection_name>
reference_table_schema_name: <source_of_truth_schema_name>
reference_table_name: <source_of_truth_table_name>
check_type: profiling
grouping_columns:
- compared_table_column_name: country
reference_table_column_name: country_column_name_on_reference_table
- compared_table_column_name: state
reference_table_column_name: state_column_name_on_reference_table
columns:
target_column:
partitioned_checks:
daily:
comparisons:
compare_to_source_of_truth_table:
reference_column: source_of_truth_column_name
daily_partition_not_null_count_match:
warning:
max_diff_percent: 0.0
error:
max_diff_percent: 1.0
fatal:
max_diff_percent: 5.0
labels:
- This is the column that is analyzed for data quality issues
date_column:
labels:
- "date or datetime column used as a daily or monthly partitioning key, dates\
\ (and times) are truncated to a day or a month by the sensor's query for\
\ partitioned checks"
country:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
state:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
Samples of generated SQL queries for each data source type
Please expand the database engine name section to see the SQL query rendered by a Jinja2 template for the not_null_count data quality sensor.
BigQuery
{% import '/dialects/bigquery.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
CAST(analyzed_table.`date_column` AS DATE) AS time_period,
TIMESTAMP(CAST(analyzed_table.`date_column` AS DATE)) AS time_period_utc
FROM `your-google-project-id`.`<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
ClickHouse
{% import '/dialects/clickhouse.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
CAST(analyzed_table."date_column" AS DATE) AS time_period,
toDateTime64(CAST(analyzed_table."date_column" AS DATE), 3) AS time_period_utc
FROM "<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Databricks
{% import '/dialects/databricks.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
CAST(analyzed_table.`date_column` AS DATE) AS time_period,
TIMESTAMP(CAST(analyzed_table.`date_column` AS DATE)) AS time_period_utc
FROM `<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
DB2
{% import '/dialects/db2.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
CAST(original_table."date_column" AS DATE) AS time_period,
TIMESTAMP(CAST(original_table."date_column" AS DATE)) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
DuckDB
{% import '/dialects/duckdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
CAST(analyzed_table."date_column" AS date) AS time_period,
CAST((CAST(analyzed_table."date_column" AS date)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
HANA
{% import '/dialects/hana.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
CAST(original_table."date_column" AS DATE) AS time_period,
TO_TIMESTAMP(CAST(original_table."date_column" AS DATE)) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
MariaDB
{% import '/dialects/mariadb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-%d 00:00:00') AS time_period,
FROM_UNIXTIME(UNIX_TIMESTAMP(DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-%d 00:00:00'))) AS time_period_utc
FROM `<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
MySQL
{% import '/dialects/mysql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-%d 00:00:00') AS time_period,
FROM_UNIXTIME(UNIX_TIMESTAMP(DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-%d 00:00:00'))) AS time_period_utc
FROM `<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Oracle
{% import '/dialects/oracle.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
{{- lib.render_where_clause(table_alias_prefix='original_table') }}
) analyzed_table
WHERE ({{ lib.render_target_column('analyzed_table')}}) IS NOT NULL
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
TRUNC(CAST(original_table."date_column" AS DATE)) AS time_period,
CAST(TRUNC(CAST(original_table."date_column" AS DATE)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
WHERE (analyzed_table."target_column") IS NOT NULL
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
PostgreSQL
{% import '/dialects/postgresql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
CAST(analyzed_table."date_column" AS date) AS time_period,
CAST((CAST(analyzed_table."date_column" AS date)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "your_postgresql_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Presto
{% import '/dialects/presto.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
CAST(original_table."date_column" AS date) AS time_period,
CAST(CAST(original_table."date_column" AS date) AS TIMESTAMP) AS time_period_utc
FROM "your_trino_database"."<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
QuestDB
{% import '/dialects/questdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM(
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM(
SELECT
original_table.*,
CAST(DATE_TRUNC('day', original_table."date_column") AS DATE) AS time_period,
CAST((CAST(DATE_TRUNC('day', original_table."date_column") AS DATE)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Redshift
{% import '/dialects/redshift.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
CAST(analyzed_table."date_column" AS date) AS time_period,
CAST((CAST(analyzed_table."date_column" AS date)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "your_redshift_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Snowflake
{% import '/dialects/snowflake.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
CAST(analyzed_table."date_column" AS date) AS time_period,
TO_TIMESTAMP(CAST(analyzed_table."date_column" AS date)) AS time_period_utc
FROM "your_snowflake_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Spark
{% import '/dialects/spark.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
CAST(analyzed_table.`date_column` AS DATE) AS time_period,
TIMESTAMP(CAST(analyzed_table.`date_column` AS DATE)) AS time_period_utc
FROM `<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
SQL Server
{% import '/dialects/sqlserver.sql.jinja2' as lib with context -%}
SELECT
COUNT_BIG({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT_BIG(analyzed_table.[target_column]) AS actual_value,
CAST(analyzed_table.[date_column] AS date) AS time_period,
CAST((CAST(analyzed_table.[date_column] AS date)) AS DATETIME) AS time_period_utc
FROM [your_sql_server_database].[<target_schema>].[<target_table>] AS analyzed_table
GROUP BY CAST(analyzed_table.[date_column] AS date), CAST(analyzed_table.[date_column] AS date)
ORDER BY CAST(analyzed_table.[date_column] AS date)
Teradata
{% import '/dialects/teradata.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
CAST(analyzed_table."date_column" AS DATE) AS time_period,
CAST(CAST(analyzed_table."date_column" AS DATE) AS TIMESTAMP) AS time_period_utc
FROM "<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Trino
{% import '/dialects/trino.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
CAST(original_table."date_column" AS date) AS time_period,
CAST(CAST(original_table."date_column" AS date) AS TIMESTAMP) AS time_period_utc
FROM "your_trino_catalog"."<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
monthly partition not null count match
Check description
Verifies that percentage of the difference between the count of not null values in a tested column in a parent table and the count of not null values in a column in the reference table. The difference must be below defined percentage thresholds. Compares each monthly partition (each month of data) between the compared table and the reference table (the source of truth).
Data quality check name | Friendly name | Category | Check type | Time scale | Quality dimension | Sensor definition | Quality rule | Standard |
---|---|---|---|---|---|---|---|---|
monthly_partition_not_null_count_match |
Maximum percentage of difference between the counts of not null values in compared columns | comparisons | partitioned | monthly | Accuracy | not_null_count | diff_percent |
Command-line examples
Please expand the section below to see the DQOps command-line examples to run or activate the monthly partition not null count match data quality check.
Managing monthly partition not null count match check from DQOps shell
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the warning rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=monthly_partition_not_null_count_match --enable-warning
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=monthly_partition_not_null_count_match --enable-warning
Additional rule parameters are passed using the -Wrule_parameter_name=value.
Activate this data quality using the check activate CLI command, providing the connection name, table name, check name, and all other filters. Activates the error rule with the default parameters.
dqo> check activate -c=connection_name -t=schema_name.table_name -col=column_name -ch=monthly_partition_not_null_count_match --enable-error
You can also use patterns to activate the check on all matching tables and columns.
dqo> check activate -c=connection_name -t=schema_prefix*.fact_* -col=column_name -ch=monthly_partition_not_null_count_match --enable-error
Additional rule parameters are passed using the -Erule_parameter_name=value.
Run this data quality check using the check run CLI command by providing the check name and all other targeting filters. The following example shows how to run the monthly_partition_not_null_count_match check on all tables and columns on a single data source.
It is also possible to run this check on a specific connection and table. In order to do this, use the connection name and the full table name parameters.
dqo> check run -c=connection_name -t=schema_name.table_name -ch=monthly_partition_not_null_count_match
You can also run this check on all tables (and columns) on which the monthly_partition_not_null_count_match check is enabled using patterns to find tables.
YAML configuration
The sample schema_name.table_name.dqotable.yaml file with the check configured is shown below.
# yaml-language-server: $schema=https://cloud.dqops.com/dqo-yaml-schema/TableYaml-schema.json
apiVersion: dqo/v1
kind: table
spec:
timestamp_columns:
partition_by_column: date_column
incremental_time_window:
daily_partitioning_recent_days: 7
monthly_partitioning_recent_months: 1
table_comparisons:
compare_to_source_of_truth_table:
reference_table_connection_name: <source_of_truth_connection_name>
reference_table_schema_name: <source_of_truth_schema_name>
reference_table_name: <source_of_truth_table_name>
check_type: profiling
grouping_columns:
- compared_table_column_name: country
reference_table_column_name: country_column_name_on_reference_table
- compared_table_column_name: state
reference_table_column_name: state_column_name_on_reference_table
columns:
target_column:
partitioned_checks:
monthly:
comparisons:
compare_to_source_of_truth_table:
reference_column: source_of_truth_column_name
monthly_partition_not_null_count_match:
warning:
max_diff_percent: 0.0
error:
max_diff_percent: 1.0
fatal:
max_diff_percent: 5.0
labels:
- This is the column that is analyzed for data quality issues
date_column:
labels:
- "date or datetime column used as a daily or monthly partitioning key, dates\
\ (and times) are truncated to a day or a month by the sensor's query for\
\ partitioned checks"
country:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
state:
labels:
- column used as the first grouping key for calculating aggregated values used
for the table comparison
Samples of generated SQL queries for each data source type
Please expand the database engine name section to see the SQL query rendered by a Jinja2 template for the not_null_count data quality sensor.
BigQuery
{% import '/dialects/bigquery.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_TRUNC(CAST(analyzed_table.`date_column` AS DATE), MONTH) AS time_period,
TIMESTAMP(DATE_TRUNC(CAST(analyzed_table.`date_column` AS DATE), MONTH)) AS time_period_utc
FROM `your-google-project-id`.`<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
ClickHouse
{% import '/dialects/clickhouse.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
DATE_TRUNC('month', CAST(analyzed_table."date_column" AS DATE)) AS time_period,
toDateTime64(DATE_TRUNC('month', CAST(analyzed_table."date_column" AS DATE)), 3) AS time_period_utc
FROM "<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Databricks
{% import '/dialects/databricks.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table.`date_column` AS DATE)) AS time_period,
TIMESTAMP(DATE_TRUNC('MONTH', CAST(analyzed_table.`date_column` AS DATE))) AS time_period_utc
FROM `<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
DB2
{% import '/dialects/db2.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
DATE_TRUNC('MONTH', CAST(original_table."date_column" AS DATE)) AS time_period,
TIMESTAMP(DATE_TRUNC('MONTH', CAST(original_table."date_column" AS DATE))) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
DuckDB
{% import '/dialects/duckdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date)) AS time_period,
CAST((DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date))) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
HANA
{% import '/dialects/hana.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
SERIES_ROUND(CAST(original_table."date_column" AS DATE), 'INTERVAL 1 MONTH', ROUND_DOWN) AS time_period,
TO_TIMESTAMP(SERIES_ROUND(CAST(original_table."date_column" AS DATE), 'INTERVAL 1 MONTH', ROUND_DOWN)) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
MariaDB
{% import '/dialects/mariadb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-01 00:00:00') AS time_period,
FROM_UNIXTIME(UNIX_TIMESTAMP(DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-01 00:00:00'))) AS time_period_utc
FROM `<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
MySQL
{% import '/dialects/mysql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-01 00:00:00') AS time_period,
FROM_UNIXTIME(UNIX_TIMESTAMP(DATE_FORMAT(analyzed_table.`date_column`, '%Y-%m-01 00:00:00'))) AS time_period_utc
FROM `<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Oracle
{% import '/dialects/oracle.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
{{- lib.render_where_clause(table_alias_prefix='original_table') }}
) analyzed_table
WHERE ({{ lib.render_target_column('analyzed_table')}}) IS NOT NULL
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
TRUNC(CAST(original_table."date_column" AS DATE), 'MONTH') AS time_period,
CAST(TRUNC(CAST(original_table."date_column" AS DATE), 'MONTH') AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "<target_schema>"."<target_table>" original_table
) analyzed_table
WHERE (analyzed_table."target_column") IS NOT NULL
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
PostgreSQL
{% import '/dialects/postgresql.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date)) AS time_period,
CAST((DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date))) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "your_postgresql_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Presto
{% import '/dialects/presto.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
DATE_TRUNC('MONTH', CAST(original_table."date_column" AS date)) AS time_period,
CAST(DATE_TRUNC('MONTH', CAST(original_table."date_column" AS date)) AS TIMESTAMP) AS time_period_utc
FROM "your_trino_database"."<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
QuestDB
{% import '/dialects/questdb.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM(
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM(
SELECT
original_table.*,
CAST(DATE_TRUNC('month', original_table."date_column") AS DATE) AS time_period,
CAST((CAST(DATE_TRUNC('month', original_table."date_column") AS DATE)) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Redshift
{% import '/dialects/redshift.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date)) AS time_period,
CAST((DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date))) AS TIMESTAMP WITH TIME ZONE) AS time_period_utc
FROM "your_redshift_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Snowflake
{% import '/dialects/snowflake.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date)) AS time_period,
TO_TIMESTAMP(DATE_TRUNC('MONTH', CAST(analyzed_table."date_column" AS date))) AS time_period_utc
FROM "your_snowflake_database"."<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Spark
{% import '/dialects/spark.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table.`target_column`)
AS actual_value,
DATE_TRUNC('MONTH', CAST(analyzed_table.`date_column` AS DATE)) AS time_period,
TIMESTAMP(DATE_TRUNC('MONTH', CAST(analyzed_table.`date_column` AS DATE))) AS time_period_utc
FROM `<target_schema>`.`<target_table>` AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
SQL Server
{% import '/dialects/sqlserver.sql.jinja2' as lib with context -%}
SELECT
COUNT_BIG({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT_BIG(analyzed_table.[target_column]) AS actual_value,
DATEFROMPARTS(YEAR(CAST(analyzed_table.[date_column] AS date)), MONTH(CAST(analyzed_table.[date_column] AS date)), 1) AS time_period,
CAST((DATEFROMPARTS(YEAR(CAST(analyzed_table.[date_column] AS date)), MONTH(CAST(analyzed_table.[date_column] AS date)), 1)) AS DATETIME) AS time_period_utc
FROM [your_sql_server_database].[<target_schema>].[<target_table>] AS analyzed_table
GROUP BY DATEFROMPARTS(YEAR(CAST(analyzed_table.[date_column] AS date)), MONTH(CAST(analyzed_table.[date_column] AS date)), 1), DATEADD(month, DATEDIFF(month, 0, analyzed_table.[date_column]), 0)
ORDER BY DATEFROMPARTS(YEAR(CAST(analyzed_table.[date_column] AS date)), MONTH(CAST(analyzed_table.[date_column] AS date)), 1)
Teradata
{% import '/dialects/teradata.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }})
AS actual_value
{{- lib.render_data_grouping_projections('analyzed_table') }}
{{- lib.render_time_dimension_projection('analyzed_table') }}
FROM {{ lib.render_target_table() }} AS analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column")
AS actual_value,
TRUNC(CAST(analyzed_table."date_column" AS DATE), 'MM') AS time_period,
CAST(TRUNC(CAST(analyzed_table."date_column" AS DATE), 'MM') AS TIMESTAMP) AS time_period_utc
FROM "<target_schema>"."<target_table>" AS analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
Trino
{% import '/dialects/trino.sql.jinja2' as lib with context -%}
SELECT
COUNT({{ lib.render_target_column('analyzed_table') }}) AS actual_value
{{- lib.render_data_grouping_projections_reference('analyzed_table') }}
{{- lib.render_time_dimension_projection_reference('analyzed_table') }}
FROM (
SELECT
original_table.*
{{- lib.render_data_grouping_projections('original_table') }}
{{- lib.render_time_dimension_projection('original_table') }}
FROM {{ lib.render_target_table() }} original_table
) analyzed_table
{{- lib.render_where_clause() -}}
{{- lib.render_group_by() -}}
{{- lib.render_order_by() -}}
SELECT
COUNT(analyzed_table."target_column") AS actual_value,
time_period,
time_period_utc
FROM (
SELECT
original_table.*,
DATE_TRUNC('MONTH', CAST(original_table."date_column" AS date)) AS time_period,
CAST(DATE_TRUNC('MONTH', CAST(original_table."date_column" AS date)) AS TIMESTAMP) AS time_period_utc
FROM "your_trino_catalog"."<target_schema>"."<target_table>" original_table
) analyzed_table
GROUP BY time_period, time_period_utc
ORDER BY time_period, time_period_utc
What's next
- Learn how to configure data quality checks in DQOps
- Look at the examples of running data quality checks, targeting tables and columns